This site is designed to take advantage of CSS. If you are seeing this, CSS must not be available or enabled in your browser. Everything should still work, but won't be as pretty. :)
invers Software
 
HomeGroup maskMasking: Problems and solutionsUniframe
  Frame editing > Tools > Group mask Index

Masking in practice

The following examples assume that you are familiar with the basic mechanism of dynamic masking. If not: Please read the mask group chapter above again from the start.

With the dynamic masking mechanism you can create a whole tier of basic effects. The following line-up should not be regarded as comprehensive, but is only meant to introduce some of the most important possibilities.

Rotated images

Digital rotation of bitmap images always leads to a loss of quality on principle. When possible, it is always better to scan the images at the correct rotation angle from the start.

But this leads to further problems: The image frame remains unrotated and the edges of the image will be jagged due to the pixel structure. Both problems can be solved elegantly with masking.

The image is simply masked with a rectangle of the same size and the same rotation angle. This makes the dead corners as well as the edges of the original image disappear and with it the roughness at the image borders.

If you then lay a physical copy of this rectangle with a transparent interior and white margin over the mask group, your image will be ready for assembling onto the page. (You have to group both frames appropriately).

Collage (paste-up)

The Rotated images example can be applied equally well with other mask shapes as well, of course. Several masked images can be assembled in a paste-up collage.

Cutting out with vectors

As long as no soft transitions are required, you can remove the background of an object, in other words cut it out along its outline. Just place a vector graphics frame over the image and select a suitable magnification. This allows you to set the control points in the vector graphic very precisely.

Set the colour of the inner raster area to black and that of the surround margins to transparent. Now mask the image with the vector graphic.

Cutting out with bitmap graphics

With halftone images there is an alternative to vector masking: Make a physical copy of the image and distort its control curve to make the outline of the subject stand out clearly. With the Brush module you can now paint out the white holes in the subject and remove any parts of the background that still remain with white paint. Apply the result as a mask to the original halftone image.

Note, though, that the edge of the mask will appear roughened by the pixel structure. If you would then prefer to have a clean edge, you can still vectorize the mask image with the Speed~Line module and use this vector mask instead.

Punch holes

The simplest way to obtain a transparent hole in an image is the following: First mask the image with the shape that the hole should take. Now the image is transparent everywhere except within the subsequent hole. For this reason you should now invert the mask.

Cutting one object with another

Cutting one shape with another is of particular interest for overlap effects.

To do this, mask one shape with the other (which has to be black for this, of course). You can use the outcome as a mask in its own right and so fill the overlap of the two shapes with an image, for instance.

Texture-filled text

How would you like a headline with an aluminium look? You can find interesting texture patterns everywhere in abundance. With a suitable textured surface read in with a flat-bed scanner and perhaps its tones distorted with the image control curve, the result can be very attractive. Mask the scanned texture with the (black) text – and that's it!

If perhaps you would like to try out the same headline with various textures, prepare a virtual copy of the image frame before masking into which you can then import the scans one after the other. The mask group will be altered automatically at the same time. The same applies to a virtual copy of the text frame.

Blend (graduated tint) in text

The same thing applies for graduated tints as for textures. Blends are images too. Converting a simple halftone graduated tint to a colour graphic and shifting the image control curves allows any desired colour graduation to be produced.

Partial colouring

Even complete text columns can be used as a mask. The column may even be a part of a text piping chain!

In the example below we have masked a vector graphic. The criterium for the selection of the fill material should be to retain the legibility of the text. Images with high contrast and fine textures can give poor results. In such cases it may be advantageous to reduce the contrast with an image control curve.

Lighten parts of the image

If you want to lighten, darken, change colour or otherwise alter only a part of an image, you can use masking for this too. Create a physical copy of the image directly on top of the original and alter its appearance via the image control curves. Mask this altered image in the desired shape.

In the result the image continues unbroken through the masked area, but has its appearance changed within it.

After a description of the basic mask effects we come to some examples for applying them in practice.

Corn circles

First the toast had to be freed from its background with a vector mask.

The inner shape was also developed as a vector graphic. This shape was copied once and moved to the right and downwards during this.

To give a solid appearance, three separate masking steps were used.

The first mask group contains a lightened copy of the image, which is masked with the non-moved vector graphic. The second contains a darkened copy of the image and both versions of the vector graphic. The non-moved graphic (black) is partly covered by the moved graphic (white). In this way only a narrow black outline will be visible. In the third mask a white raster area is masked by an inverted combination of the above items.

Rio

The shadow, outline and the individual bits of confetti are created conventionally as text and vector graphic respectively. For the fill the confetti is masked with the text shape in black and without an outline. Individual extra confetti pieces are scattered on top of the combination.

Victim of the telephone

In the background the telephone image – inverted by a black rectangle – masks a blue raster area. Directly above a white vector graphic covers the innards of the telephone.

The figure shape follows, which masks a red raster area and so gives it a colour as well as making it appear transparent.

Above this lies the vector graphic used previously in white, but this time in yellow and masked with the telephone image. (As the inner textures of the telephone are now transparent, without the white vector graphic the blue background would show through.)

The text is recoloured again in the usual way: A group made up of a yellow raster area and the blue-coloured telephone vector graphic is masked by the black text column.

Tutti frutti

Here just the monochrome outline pattern was available. Each object was surrounded by one or more vector paths. The paths were given the background colour of each object.

Subsequently the vector graphic was copied in the same position and an outline colour set for each of the objects. By masking this graphic with the original monochrome image, each outline gets a suitable colour.

Salamander

The background raster area and the black vector graphic lie over each other without masking. The text column was used as a mask for a group that consisted of a black raster area and a coloured copy of the graphic. This alters the colour of the text exactly where it lies over the vector graphic.

Alphabet

A b/w scan of a wedge-shaped font is used as a mask for a dark brown background. This mask group is placed on a slightly lightened copy of the background. A group of b/w scanned hieroglyphics masks a large dark brown capital A. This mask group is then placed on top of an identical light blue A, which is given a shadow falling to the left.

TV interference

The wavelike texture was scanned as a rectangle. That is why the oblique edges had to be trimmed with an angled vector mask. The result in turn masks the image. This makes the image visible only within the wavy area and covers the image lying in the background only there.

Letter texture

To exclude inaccuracies from manual positioning, modified copies of the same (rotated) text frame were used for all levels.

At the bottom lies a text frame with transparent lettering but provided with a shadow. The shadow offset is relatively large. Above this lies a raster area frame with shadow and on top of this a darkened version without shadow, masked by the shadow in the second text frame. The shadow offset is smaller than in the first text frame.

A further text frame follows, this time without a shadow but with a black outline. Above this lie three mask groups, each containing one text frame that masks a texture pattern image. During this only one letter is black at any time, the others transparent. In this way each letter is filled individually with its own texture pattern.

Collage

Here various image types and resolutions were mixed. The portraits originate from the same photograph. This picture as well as the one lying in the background were already colour-separated externally.

On the other hand the texture and the cocktail glass originate from a flat-bed scanner or a still video camera and were available as RGB data.


Copyright © invers Software (Home)
Last updated on June 24, 2015

HomeGroup maskMasking: Problems and solutionsUniframe